Vesuvio II

Auf Anfrage!

  • VESUVIOII
Vesuvio  II Vesuvio II  illuminates bursts of fog with advanced RGBA+UV LED... mehr
Produktinformationen "Vesuvio II"

Vesuvio II

Vesuvio II illuminates bursts of fog with advanced RGBA+UV LED color mixing, providing ferocious effects for events and performances. Featuring an impressive 40,000 cubic feet of fog per minute, it boasts a best in class 40 seconds of full burst output. New dual LED sections give greater creative control for a more even coverage of light. The Vesuvio II is built for efficiency, consuming only 80 ml/min of QDF fluid. This highly versatile unit can run in three different positions: vertically, horizontally or from overhead with mounting brackets. It works best with CHAUVET QDF quick dissipating fluid.

AT A GLANCE

  • Advanced red, green, blue, amber, and UV (RGBA/UV) LED color mixing

  • 40 second continuous bursts of fog, for intense effects and performance

  • 40,000 CFM fog output for intense, large effects

  • 2.5 l fluid tank for reliability in production

  • Strong, sturdy construction for numerous production types

  • DMX control for ease of use in production situations

  • 3- and 5-pin DMX input/output connections

SPECIFICATIONS

OPTICAL

  • Light Source: 10 LEDs (RGBA/UV) 8.5 W, (3 A), 50,000 hours life expectancy
  • Illuminance (Center): 199.5 lux @ 5 m
  • Illuminance (Linear): 154 lux @ 5 m
  • Illuminance (Both): 334 lux @ 5 m
  • PWM Frequency: 126 Hz

DYNAMIC EFFECTS

  • Dimmer: Electronic
  • Shutter/Strobe: Electronic
  • Strobe Rate: 0 to 20 Hz
  • Output: 40,000 cfm
  • Low Fluid Shutdown: No

CONSTRUCTION / PHYSICAL

  • Dimensions: 19.49 x 13.18 x 9.39 in (495 x 335 x 239 mm)
  • Weight: 28.4 lb (12.9 kg)
  • Exterior Color: BLACK
  • Housing Material: Steel
  • Tank Capacity: 0.7 gal (2.5 l)
  • Fluid Consumption: 80 ml/min
  • Maximum Run time: 1 hour @ 40s bursts, 1m intervals (using Chauvet QDF fluid)
  • Maximum Run time: 2 hours @ 40s bursts, 2m intervals (using Chauvet QDF fluid)
  • Maximum Run time: 2.5 hours @ 40s bursts, 3m intervals (using Chauvet QDF fluid)

CONNECTIONS

  • Power Connection: Edison plug to Seetronic Powerkon IP65
  • Power Input: Seetronic Powerkon IP65
  • Data Connectors: 3- and 5-pin XLR
  • Cable Length (power): 5 ft (1.5 m)

CONTROL

  • Control Protocol: DMX
  • DMX Channels: 15
  • Modes/Personalities: 1 personalities
  • On-Board Control: Yes
  • Included Remote: No

ELECTRICAL

  • Input Voltage (120V): 120 VAC, 60 Hz
    Input Voltage (220V): 230 VAC, 50 Hz
  • Power and Current (120V): 1,480 W, 12.55 A @ 120 V, 60 Hz
    Power and Current (220V): 2,880 W, 12.55 A @ 230V, 60 Hz
  • Heat-up Time (120V): 10 min
    Heat-up Time (220V): 10 min
  • Breaker Size (120V): 15A
    Breaker Size (220V): 15A

CERTIFICATIONS / QUALIFICATIONS

  • CE
  • IP Rating: IP20, dry location
  • Temperature (Ambient): -4 °F to 113 °F (-20 °C to 45 °C)
  • Thermal Dissipation @ 120V: 5,050 BTU per hour (max)
  • Thermal Dissipation @ 230V: 9,825 BTU per hour (max)

WHAT'S INCLUDED

  • Vesuvio II
  • Seetronic Powerkon IP65power cord

 

Weiterführende Links zu "Vesuvio II"

Power In (M) TRUE1 (IP65) Neutrik connecter with cover (BOM#24)PTF1100000469Power In (M) TRUE1 (IP65) Neutrik connecter with cover (BOM#24)
POWER CABLE (BOM#24)PTFX20147POWER CABLE (BOM#24)
Red power switch (BOM#20)PTGK065Red power switch (BOM#20)
Fluid Tank/Container - 2.5L 170X131X177mmPTGQTSLJ102Fluid Tank/Container - 2.5L 170X131X177mm
PTGQTYZ005Copper Filter (BOM#49)
PTGYB032120V Magnetic valve (BOM#37)
PTGYB038120V PUMP (8 screw holes) (BOM#42)
safety ring M8×16 32 (BOM#18)PTH4400005safety ring M8×16 32 (BOM#18)
PTI002323120V FUSES 15A (BOM#21)
Aluminum cap (BOM#30)PTI008082Aluminum cap (BOM#30)
3-Way Connector (BOM#19) (BOM#29)PTI0081433-Way Connector (BOM#19) (BOM#29)
PTI016038FAN (BOM#10)
PTI017003(HYALINE) POLYURETHANE TUBING 0.4/meter 4X2.5MM φ4X2.5 (BOM#63)
PTI021080CAP ASSEMBLY (BOM#40,44(x2),45,47,49,52,54)
PTI101011059LEFT COVER (BOM#51)
PTI101011062Filter net (BOM#8)
PTI101011064Heater top cover (BOM#15)
PTI101011065Heater bottom cover (BOM#17)
Fluid container bottom plate (BOM#57)PTI101011220Fluid container bottom plate (BOM#57)
PTI101011768Botton housing (BOM#19)
PTI101011769Top cover (BOM#4)
PTI101011770Control panel (BOM#21)
CONTAINER BRACKET (BOM#3)PTI101011771CONTAINER BRACKET (BOM#3)
PTI101011772Lamp frame (BOM#2)
PTI101011773Lamp frame (BOM#64)
Hanger bracket (BOM#32)PTI101011774Hanger bracket (BOM#32)
PTI101011838Handle (BOM#8)
copper ring (BOM#33)PTI103010004copper ring (BOM#33)
PTI103010005copper cap (BOM#32)
PTI103010008copper cap (BOM#39)
Solenoid copper connector - male (BOM#38)PTI103010009Solenoid copper connector - male (BOM#38)
COPPER RING  φ3.6 (BOM#56)PTI103010011COPPER RING φ3.6 (BOM#56)
COPPER NUT FOR PUMP (Goes on Threaded Brass Stem) (BOM#55)PTI103010017COPPER NUT FOR PUMP (Goes on Threaded Brass Stem) (BOM#55)
Threaded Brass Stem (BOM#34)PTI103010057Threaded Brass Stem (BOM#34)
Solenoid copper connector - female (BOM#36)PTI10301006Solenoid copper connector - female (BOM#36)
PTI103020043Straight Aluminum connector (BOM#41)
PTI103990076Fastener mounting hole (BOM#33)
PTI103990077Fastener mounting hole (BOM#34)
PTI104010002(HYALINE) TUBING φ6X4 (BOM#40)
Black fluid hose (BOM#45) - LENGTH .31M/1.02 FTPTI104010022Black fluid hose (BOM#45) - LENGTH .31M/1.02 FT
PTI104030019Nut and brass seal (BOM#39)
PTI104030044RUBBER FEET25X25MM (BOM#35,40)
PTI104030054water-proof washer (BOM#54)
PTI104030134(SILICONE) TUBING from container 0.2/meter or 8 inches 6X4MM
LCD screen (BOM#24)PTI104060001LCD screen (BOM#24)
PTI104060021Plastic cover 223*48*1MM (BOM#5)
Plastic cover 136*129.3*1MM (BOM#1)PTI104060022Plastic cover 136*129.3*1MM (BOM#1)
Quick connector (BOM#44)PTI104080010Quick connector (BOM#44)
Lens (BOM#9)PTI104090003Lens (BOM#9)
MEMBRANE KEYPAD (BLUE) (BOM#23)PTI104110004MEMBRANE KEYPAD (BLUE) (BOM#23)
Feet (BOM#55)PTI104120008Feet (BOM#55)
(BLACK) RUBBER TUBING    0.4/meter    8X4 MM (BOM#53) (16 inches)PTI104120009(BLACK) RUBBER TUBING 0.4/meter 8X4 MM (BOM#53) (16 inches)
50 degree O-shape washer (BOM#35) ring seal for part # PTI103010091PTI10412002550 degree O-shape washer (BOM#35) ring seal for part # PTI103010091
Power supply DC19V7A (BOM#31)PTI106080033Power supply DC19V7A (BOM#31)
210° CELSIUS  16A/125V manual-reset thermostat - KSD301-GR  (BOM#18)PTI106130022210° CELSIUS 16A/125V manual-reset thermostat - KSD301-GR (BOM#18)
Copper tube (BOM#28)PTI117010031Copper tube (BOM#28)
Filter (BOM#9)PTI118020021Filter (BOM#9)
120V Complete HEATER core with metal housing (BOM#13)PTI201020139120V Complete HEATER core with metal housing (BOM#13)
PTI2010301543-pin DMX PCB (BOM#17)
Omega Bracket with 1/4-turn fasteners (BOM#61)PTI201030156Omega Bracket with 1/4-turn fasteners (BOM#61)
230V MPCB 120V/230V H-2VCH V1 (BOM#20)PTI203011192230V MPCB 120V/230V H-2VCH V1 (BOM#20)
PTI203021082Display PCB 120V/230V H-2VCH V1 (BOM#30)
LED PCB LED-1000-168 (BOM#10)PTI203032024LED PCB LED-1000-168 (BOM#10)
LED PCB H-2VCH-LED-170 (BOM#11)PTI203032025LED PCB H-2VCH-LED-170 (BOM#11)
5-pin DMX PCB (BOM#16)PTI2030420015-pin DMX PCB (BOM#16)
Plastic WasherPTJ3021700480Plastic Washer

Es sind leider keine Geräte verfügbar.

Es kann vorkommen, dass in unserem Lager noch gebrauchte Geräte vorhanden sind. Fragen Sie gerne über unsere Service-Hotline +49 871 40875521 oder per Email info@lights-whatever.de bei uns nach. Wir helfen Ihnen gerne weiter!

Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Vesuvio II"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Zuletzt angesehen